Camp Chair Cell Phone Holder

prusaprinters

<p>This holder is designed to hang on the side fabric of the wonderful Cascade Mountain Tech chair purchased from Sam's Club.</p><ul><li>Also see my <a href="https://www.printables.com/model/57948-camp-chair-cup-holder">Camp Chair Cup Holder</a> for hanging on the other side of the chair.</li><li>The hanger design at the top is obviously specific to this application. On request, I might be persuaded to implement some variations and add to this posting. PM me.</li><li>With the included Fusion 360 .f3d file you can adjust things like the width and depth of the brackets (set to 85mm x 19mm in the posted .stl files), the height of the brackets above the bottom stop (set to 60mm and 125mm in the posted .stl files), and the fit margin (snug or loose) between the two pieces (set to 0.3mm in the posted .stl files - nice slip fit as printed on my Prusa Original Mini).</li></ul><p>Update V3 (August 2022): &nbsp;</p><ul><li>Added tabs to the “rings” so that the phone can't slip between the rings when being inserted.</li><li>Increased the bracket depth from 15mm to 19mm to accommodate my daughter's thick case which holds cards.</li><li>Increased the model “fit_margin” from 0.2mm to 0.3mm to ease the fit of the rings on the frame, as printed on my printer.</li><li>Added nubs above the frame slots to retain the rings, due to the slightly looser fit.</li></ul><p><br>PLA, PETG, or ASA/ABS with 4 or 5 perimeter layer count for added strength. &nbsp;I recommend ASA or ABS if you plan to leave this in your car during the Arizona summer (PLA and PETG get soft).</p><p>&nbsp;</p><p>Category: Sport &amp; Outdoors</p>