Car Seat Headrest Hooks, Bottle Holder

thingiverse

This is a hook/bottle holder design for car backseats, for a single assembly you will need: One Car Bottle Holder_02mm or 05mm One Car Bottle Holder_Bottle Holder 24mm or 26mm One Car Bottle Holder_Hook Two #4 x 5/8 in flat head phillips wood screws Some super glue Note: Car Bottle Holder_02mm has a clearance of 0.2mm on all the joints Car Bottle Holder_05mm has a clearance of 0.5mm on all the joints clearance of 0.2mm works fine on my Prusa I3 MK3 Car Bottle Holder_Bottle Holder 24mm and 26mm has difference clamp size, a normal bottle will use 26mm, but the cheap water bottle I got from Costco need to use 24mm. For assembly, apply some super glue on the rectangular part which will join the main holder for additional strength, and put in the screws. If you have a small print bed, please use the following file for Car_Bottle_Holder_02mm: Car Bottle Holder 02mm Part1.STL Car Bottle Holder 02mm Part2.STL Car Bottle Holder 02mm Part3.STL After print out all these parts, you need to use two #4 x 5/8 in flat head phillips wood screws to join them together. layer height: 0.2mm Infill: 20% Infill type: Grid Support: N/A Filiment type: PLA