Carbonation Cap Kegerator Font

thingiverse

Here we have a new interesting remix of two projects to take this idea into a new direction for pluto tap owners. 3x PCO 1881 (aka PET Bottle tops) are attached to a standard base for fits keg-king/mangrove-jacks kegerator fridge. Diagonal measurement from centre to centre across the circumference mounting holes is 97mm. This is designed to suit the PET Carbonation Caps that are cheap and easily mated to this unique tap head. the kegerator owner could reasonably buy one Pluto gun, and swap the gun between kegs. After the session concludes, the pluto gun is then returned to the fridge or cleaned for the next session. Simply connect each carbonation cap to beer line and whatever keg disconnect type you use on your kegs. https://www.google.com/search?q=carbonation+caps https://www.google.com/search?q=pluto+gun https://www.keg-king.com.au/s4-homebrew-pack.html this model has been printed in both PETG and ABS, and i can personally confirm PETG is preferable. Finish quality and bed adhesion was more successful with PETG. ABS was printed at 232C and 110c bed on an ender3 pro. PETG was printed at 232c and 100c bed on an ender3 pro. original projects in this remix; https://www.thingiverse.com/thing:3732085 thank you for the base sketch of the font >> https://www.thingiverse.com/omphteliba https://www.thingiverse.com/thing:499261 Thank you for the PCO1881 insert used as a component (reposted here) >> https://www.thingiverse.com/jsc Fusion 360 archive and active project for the collar .STL's for aligning to your printer profile; - please print with support for the 1881 font as the PCO threads need to defy gravity. - print with wall thickness of 3mm - 15% cubic infill for the 1881 font - 25% lightning infill for the collar - layer thickness was 0.2mm on both models - use a brim on both models .gcode 'ready to go' load for instant Ender3 Print from TF. good luck!