Carriage Adapter Plate for 3D Printed Linear slide

prusaprinters

<p>This is an adapter plate I made to allow a the Kossel Mini's delta arm carriage to be mounted to jcrochol's printed 3d Linear Slide that KongorillaSJK scaled for Misumi 2020 (<a href="https://github.com/kongorillaSJK/recirculating">https://github.com/kongorillaSJK/recirculating</a>). Note: this is NOT for the carriage_recirculating part, this is the standard carriage part from the Kossel repo!)</p> <h3>Instructions</h3> <p>This uses M3 screws. For the slide plate to adapter, use very short screws (I think 8mm should be ok - I will update when I have confirmed), or cut any excess sticking out of the adapter plate so it is flush with the side of the plate that mates with the carriage.</p> <p>For mounting the carriage to the adapter plate, there are 4 captured nut cavities. I may revise these to accomodate nyloc nuts, but for now standard M3 Nuts. Use 12mm or 14mm screws for the upper mounting and 8 or 10mm for the lower mounting holes.</p> Category: 3D Printer Parts