Case for TinyFab Heatbed Driver Board for Cetus3D

thingiverse

This is a critical issue for the driver connected to the heatbed controller developed by TinyFab for the Cetus3D.\r\n\r\nView the attached STL and FreeCad source file.\r\n\r\nThe mounting process remains incomplete but is currently underway... To print this case easily, use PLA with 20 or 60% infill and supports.\r\n\r\nFor attaching the board, utilize M3-sized screws from a stock personal computer, with a maximum thread length of 7mm.\r\n\r\nYou can pair the driver case with either the stock metal base case from Tiertime or the TinyFab case showcased in my photos.\r\n\r\nChangelog:\r\n\r\n2018-05-12 V1: The initial case design without mounting holes was released.\r\n\r\n2018-05-13 V2: An updated case with mounting holes in the baseplate for attachment to the Cetus3D printer's aluminum frame was introduced. Additionally, a T-nut is required to secure the case to the frame; M3x6 or M3x8mm personal computer screws should be used for this purpose.