Castle dice tower with moveable gate

thingiverse

This is a dice tower for all dice playing board games. The gate can be lifted up so the dices do not roll on the table. No support structure needed when printing, however, requires a calibrated printer. Update 25-09-2017: New version uploaded. High and low resolution with added window borders, plant and better front gate. Small hole also added on the bottom for a small light for the dungeon. Update 2018: Made a version without stairs so it can be used as a pen/tool holder. Created in Solidworks Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: No Resolution: 0.15mm Infill: 20% Instructions Update: Version 3 is up. Printed on UM2 with 0.15mm layer PLA and ABS. Remove support when done. Took about 22 hours to make. Small sized dice tower is about 10 cm in height without buildtin support. (Recommended for small printer) Castle_w_top_w_support_V2.STL is a full size dice tower with a larger platform at top and with builtin support. (Recommended for larger printer) Castle_no_top_w_support.STL is full size without the top and with support for the arc. Castle_w_top_no_support.STL is a full size dice tower without the support structure in the arc.