Cat Collar Tile Mount

prusaprinters

<p>I designed this mount to pressure fit a Tile Sticker (2020 version) on my cat's collar. The design is meant to be print-in-place, which means I pause the print midway through and put the collar on it, allowing the print to finish around the collar. The collar is designed to hang at a bit of an angle so it faces more downward so it doesn't bother the cat as much. Designed for a collar of 10mm width, but can probably fit a larger collar if necessary.</p><p>&nbsp;</p><p><strong>Printing Instructions:</strong></p><p>Print at 0.2 or 0.3 layer height. A brim may be necessary if you have adhesion issues. Pause print at ~87 layers (at 0.2) or ~57 layers (0.3) and put the collar between the uncompleted loops. Finish the print and remove from print bed. Press Tile into the mount and apply collar to cat as directed.</p><p>Recommended to print in glow-in-the-dark so you can spot your feline friend at night or in dark areas.</p>