Catalyst Machine Works - BangGod Frame - TPU Parts

thingiverse

These are prototype TPU parts for the Catalyst Machine Works 6" Frame. This is under contstruction, so expect changes, nothing is perfect yet. CRSFAntennaHolder_v20.stl: Antenna Mount for 1x TBS Hand-Tuned CRSF in the middle and 2x TBS Pro LHCP for the Air unit on the sides. => After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed. CRSFAntennaHolder_Mini.stl Antenna Mount for 1x VAS Mini CRSF Antenna in the middle and 2x TBS Pro LHCP for the Air unit on the sides. => After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed. CRSFAntennaHolder_DjiOnly.stl 2x TBS Pro LHCP for the Air unit on the sides, no Antenna in the middle. => After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed. ledHolder_v3.stl: LED Mount for this: https://www.catalystmachineworks.com/products/circular-rgb-led-board-sw316-an?_pos=10&_sid=5818da0e6&_ss=r GPS_Mount_v4.stl: Is only if you don't use a GoPro for this part: https://www.aliexpress.com/item/32917782967.html?spm=a2g0s.9042311.0.0.5e084c4dUY4j20 Print in TPU.