CD rack shelf Regal

thingiverse

I took the CD Rack by "mannesahne" for reference, built it up completely new in CAD and made 3 versions of it: a. CD_Rack_einzel_neu: suits for single CD's b. CD_Rack_Doppel: suits for double CD's c. CD_Rack_Sonder: suits for most "non-conform" CD-sleeves, e.g. such as paper-sleeves or double or three-CD samplers, too. All three versions are almost cubic, the height was the result of the needs I had. Due to the height there is always one slot which deviates in the height compared to the other ones. Improvements made to the rack from "mannesahne": a. better printability, such as wall thicknesses compared to 0,4mm nozzles or bottom thickness compared to layer thickness 0,16mm (this reduced useless nozzle-travelling and in the end printing time descended from 19h to 15h!) b. removed holes (support would be needed anyhow) c. more wideness that most "non-conform" CD-sleeves will fit in - I measured about 15 such non-conform CD's and took the biggest values I measured If anyone needs another height and more or less slots please feel free to contact me, adaption will be an easy one :-)