Celestron f6.3 gearbox adapter / ZWO ASI cameras with filter holder

cults3d

Celestron f6.3 gearbox adapter / ZWO ASI cameras with filter holder This adapter is compatible with different types of gearboxes, the Celestron manufacture with 105 mm backfocus or the old Japanese ones with 86 mm backfocus as well as Meade or Antares also with a bf of 86mm.it is suitable for ASI cameras of bf 12.5 or 17.5 mm. Choose the body size you need according to the type of reducer ( BF 105 or 86 mm) and the Bf of your camera. 4 types of body: BF 105 / 12.5 BF 105 / 17.5 BF 86 / 12.5 BF 86 / 17.5 Also choose the housing it fits ( with the right markings). All parts are printed with 4 perimeters and 30% filling. For threading , a layer height of 0.12 mm max is required. For mounting: Screw your reducer onto the telescope as well as the adapter body. Then, present the filter chamber by positioning it as you wish ( opening for insertion of the filter). Make a mark (with tape for example) and stick the chamber on the body by aligning the marks. Glue the housing in place by spreading it slightly ( there are 4 studs of positioning). Be careful not to put, neither too much glue, nor too close to the edges for avoid overflows. Screw your camera on the T2 plate and before gluing it on the chamber to be able to position the usb port of the camera in the desired position. Insert the filter holder into the chamber and apply glue to the two slots provided for cap positioning as well, and on a thin line between these two slots. Glue the cap on. The filter chamber, filter holder and its cap are common to all configurations. Use 2-component epoxy glue in a thin layer. Google translation ( Sorry ) Celestron f6.3 reducer adapter / ZWO ASI cameras with filter holder This adapter is compatible with different types of reducers, Celestron manufacturing Chinese with 105 backfocus or Japanese-made old ones with 86mm backfocus as well as Meade or Antares also with a 86mm bf. It is suitable for bf ASI cameras 12.5 or 17.5 mm. Choose the body size you need according to the type of reducer (BF 105 or 86 mm) and Bf from your camera. 4 body types: BF 105 / 12.5 BF 105 / 17.5 BF 86 / 12.5 BF 86 / 17.5 Also choose the appropriate housing (with the correct inscriptions). All parts are printed with 4 perimeters and 30% infill. For threads, a layer height of 0.12 mm max is required. For mounting: Screw your gearbox onto the telescope as well as the body of the adapter. Then present the filter chamber by positioning it as desired (opening for filter insertion). Make a mark (using scotch tape for example) and stick the chamber on the body by aligning the marks. Glue the housing slightly apart for the installation (there are 4 studs positioning). Be careful not to put neither too much glue nor too close to the edges to avoid overflows. Screw your camera on the T2 plate and before sticking it on the room to be able to position the usb port of the camera in the desired position. Insert the filter holder in the chamber and apply glue in the two slots provided for positioning the cap as well, and on a thin line between these two housings. Glue the cap. The filter chamber, the filter holder and its cap are common to all configurations. Use 2-component thin layer epoxy glue.