CH Throttle Quadrant Thin Table Clamps
prusaprinters
<p>If you want to use the CH Throttle Quadrant (a popular flight simulator peripheral) with a thinner table top you probably end up putting random stuff between the clamps and the table to get a grip. This should work for tables down to 1/4 inch or ~6mm. If you want even thinner let me know i can make new STLs. The photo shows the original clamps on the left vs the 3D printed ones on the right.</p> <h3>Print instructions</h3><p>Print flat on the side like shown in the Prusa Slicer screenshot so you get maximum rigidity. This should be the suggested orientation after importing the STL anyway. Support should be set to "support on build plate only".</p>
With this file you will be able to print CH Throttle Quadrant Thin Table Clamps with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CH Throttle Quadrant Thin Table Clamps.