Charybdis and Scylla wrist rest out of flexible filament TPU
prusaprinters
<p>This is a wrist rest for the Charybdis and Scylla Keyboard from <a href="https://bastardkb.com/">https://bastardkb.com/</a> . </p><p>The bottom part can be printed in PLA or PETG, the top one I printed upside down with ziro 95A TPU with 2.1mm wall thickness, 0.75mm for the bottom layers (top side of the wristrest) and 0 top layers because it's a waste of expensive TPU and really hard to print with the 3% Gyroid Infill. This gives me the squishiness that I find comfortable, but you might want to adjust, mine barely buckles. </p><p>I use the same kind of rubber feet the keyboard comes with, 10mm diameter, 2mm thick. </p><p>For a right scylla or left Charybdis just mirror the models. </p><p>The whole wrist rest is 38.5mm high with the rubber feet, I would recommend to test what height you find comfortable with random objects and then adjusting the height of the cushion (not the base!) in the slicer. </p><p>0 top layers in prusaslicer don't work so I set it to 1 top layer and set a filament change at the last layer and adjust the height adding the height of the last layer, I hope this makes sense</p>
With this file you will be able to print Charybdis and Scylla wrist rest out of flexible filament TPU with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Charybdis and Scylla wrist rest out of flexible filament TPU.