Chastity Cage 2

thingiverse

Opescad file and images. Remixed from https://www.thingiverse.com/thing:3082083 A newer version of the previous one. The code is again a mess but some customization is possible. No supports are provided to 3D print it, so give supports before printing it. My PC is not strong enough to render it and make an STL file. That's why I use Openscad instead of Fusion360 as Openscad runs decently on my PC. You can change the "base_ring_diameter" and "cage_length" parameter in the .scad code to get a better fit. No other parameter should be changed. Toggle the "separateParts" parameter (0 or 1) to separate or assemble the parts. -The inner diameter of the cage: 32mm -The inner diameter of the base ring: 62mm -Total cage length: around 80mm -The separation between the base ring and the cage: around 10 mm at the locking part. -Anti-pullout ring inner diameter: around 24mm (variable due to non-circular shape) The anti-pullout ring inside needs to be made up of something a little flexible but strong like Nylon-12. It should not be too loose or too tight. It should be a perfect fit. Test it to check whether it is comfortable or not.