CK Wing VTOL Y3 Conversion
thingiverse
Previously I showed how to convert a CK Wing to tailsitter VTOL: https://www.thingiverse.com/thing:5754929 This time I converted a CK Wing to VTOL Y3. Materials: (1) 3D print 4 Carbon Fiber Square Holders. I used PLA+ 100% infill. Also need 8 M3*35mm screws and nuts. (2) 3d print 1 Tail boom holder PLA+ 100% infill. 1 M3* 40mm screw with nut. (3) Tilt mechanism please refer to https://www.thingiverse.com/thing:2942650 Note: The tilt servo slot only fits Emax ES3352 Servo which is smaller than normal servos. (4) Rear motor mount can refer to https://www.thingiverse.com/thing:5513553 (5) Two 10X10X 250 or 300 mm Square carbon fiber tube. (6) One 12 (OD) X 10 (ID) mm Carbon fiber tube 100 mm length. Electronics: (1) H743 V3 with GPS/compass or any flight controller that can control VTOL Y3. Ardupilot. (2) Three 35A-40A ESCs (3) Two 2306 2450kv motors with 6X4.5 propellers. (4) One 2212 1400kv motor with 8X6 propeller. Note: Other motors work too such as three 2307 motors with 8X6 propellers (5) 4S lipo battery, 1500 mah. Other works too such as 4S 6800. Flight video: https://youtu.be/W6_KqMsom3k
With this file you will be able to print CK Wing VTOL Y3 Conversion with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CK Wing VTOL Y3 Conversion.