Cleated Conveyor 24"x36"

grabcad

Dorner Parts Conveyor24" Belt Width36" Length30" Entry/EjectHeight50mm Cleats spaced 4" apartCleated conveyor for collecting and processing new aerospace tie downs. Collection of preset parts occurs, conveyor indexes, and our next station bundles and ties them together.Parts list below 32CTM30-0300200AC30471 3200 Series Belted end drive cleated conveyor with V-guide belt tracking, standard 3" pulley drive tail, standard 3" pulley idler tail , 30" (762mm) wide belt x 3' (914mm) long, output shaft in position A, bolt on 2.50" (64mm) tall aluminum high side both sides, with type C 2.36" (60mm) straight cleat on 4.71" (120mm) centers. NOTE: Usable cleat width is 1" (25mm) less than conveyor belt width. Includes recommended mounting brackets. Uncrated weight = 125 lbs. (56.7 kg). 32MBPSAC2014 3200 Belted & LPZ Belted Series standard load cleated bottom mounting package for an end drive conveyor, mounted in the A position, 20:14 pulley ratio. Uncrated weight = 13 lbs. (5.7 kg). 62M060PS423EN 3200 Belted Series standard load parallel shaft variable speed VFD gearmotor, .17 Hp (.13kW), 230/460 volt, 3 phase, 10-60 Hz, 28 RPM, providing a belt speed of 5.5 - 33 ft/min (1.7 - 10 m/min). Order variable speed controller separately. Uncrated weight = 26 lbs. (11.8 kg). 39MFH30-2024F Fixed height stand with fixed foot pads for a 30" (762mm) wide 3200 conveyor. Stand is adjustable from 20" to 24" (508mm to 610mm) with a base width of 31.5" (800mm). Required stand height is 21.6" (547mm). 39MB-TS Diagonal bracing for two-legged H or A style stands up to 30" (762mm) tall. Above conveyor load capacity is 286 lbs. (129 kg) based on a conveyor decline of 0 degrees and a non-accumulated, evenly distributed load. Stand support components will provide an infeed belt height of 30" (762mm) and a discharge belt height of 30" (762mm). Cleated conveyors with a belt width greater than 24'' will include a return belt support rail on underside full length.