Click Probe - To level your print bed
prusaprinters
<p>It is a Klicky style probe for leveling the print bed, but simpler. </p><p><strong>You will need:</strong> Four magnet that are 4mm thick, 6mm in diameter and press fitted.</p><p>One washer that goes on the back of the probe dock with some CA glue.</p><p>Two M3 Nuts and 2 M3 screws. Two small screws for mounting the switch to the probe.</p><p>One connector for your board of choice.</p><p>Some wire, are used to connect the magnet with the switch, and again from the magnets in the probe arm to the board. The wire are only soldered to the switch</p>
With this file you will be able to print Click Probe - To level your print bed with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Click Probe - To level your print bed.