Clicking modular life counter

cults3d

Modular life counter with clicking sound. Prepared for 0.4 nozzle. 3,6cm tall. With smaller nozzle you can print it smaller too (f.ex . with 0,2mm print with 50% model size). One counter is: - stand1 + stand2 - center + ring (or thin center + thin ring) - use as many as you want - additional separator, if you want it (print one less than number of rings) - better to print it with different colour Normal and thin centers are compatible so you can use like normal-thin-normal or thin-thin-normal-normal etc. options. Just remember to print the same size rings as centers Stands and centers can be glued together, but you dont need to (at least with few rings) Should work up to like 5-6 rings. If you will need more I will make additional stand part for middle. Two ring sizes, normal and thin. Both with carved or domed numbers. Stand versions: normal (counter on top), angled - both with simple or carved (additional decoration on back - use left-right lines for bottom layers) On photos: - normal stand with thin rings and separator - carved stand with normal rings