Clothes-Drying Peg Hanger Links

prusaprinters

<p>The hanger at home broke so I decided to design and print these links so it doesn't have to go to waste. This is an updated version of my very first design (seen printed in Orange PETG).&nbsp;</p><p>&nbsp;</p><p>I recommend printing it with PETG over PLA because it makes the opening part ever so slightly more flexible, which makes it easier to connect with existing/other printed pieces, though PLA works as well.</p><p>The design of my hanger requires 2x basic hook and 1x joining piece for one side. The two basic hooks are attached to the top and the actual hanger part respectively. Since the thickness of the attaching area on the blue parts in the photo seems to be thinner than the middle pieces themselves, I designed the modified hook, which has a narrower opening on one side (denoted by the arrow). This isn't to say that the basic hook won't work. Because all of the hooks are in tension when it's hung up, there should be no issue of hooks slipping out of their place. However, when you collapse the hanger for storage, the basic hook might slide out.</p><p>&nbsp;</p>