Clothes hanger stand

prusaprinters

<h3>Introduction</h3><p>This clothes stand is designed to fit children clothes but as the leg length can be changed so it can fit adult clothes.</p><h3>Hardware</h3><p>The tube used has 25mm diameter &nbsp;slightly under 1 inch so one can scale the model up to 102% and it should fit 1 inch tube also.</p><p>I used following tube lengths: leg tubes length 710mm, horizontal length 780mm resulting in horizontal tube height of 730mm and the leg spread of 460mm but the tube lengths can be modified as needed&nbsp;</p><p>There is also 2 M4x40(or 35) bolts and nuts for fixing the top tube to the printed ends</p><p>I used woodscrews to fix the leg ends to cabinet top so it would not slip off.</p><h3>Print settings</h3><p>I used 0.8 mm nozzle and 0.55 layer height and that worked without supports but other layer height nozzle combinations might need supports in some places. i printed it in PLA but PETG will also work.</p>