Cloud toilet paper holder

thingiverse

This is a toilet paper holder with a shape inspired by a cloud. For space reasons it isn't so big, so it can accomodate only 4 full size rolls and one more reduced size roll. Due to my 3d printer build plate, I divided the box into three parts. I printed the box using a build plate of 210 x 210 mm (Flying Bear Ghost 5). For the height 10 cm is enough. If you prefer to see the paper roll on the top-right side more in center, it is possible to integrate the holder with a support. The support will hold the top roll about 1 cm above the 3 baseline rolls. The 3 parts have 2 joints on each side so they can stick together. To hang it on the wall I used 3 hooks for countersunk screws. I added the possibility to close the toilet roll hole with a cap. Then you can decorate the cap, for example with a drop. The cap can be fixed in the hole using 5 curved strips. Each strip has a L-shaped attachment for the corresponding hole in the cap. The strips are of two shape: a shape for small toilet rolls and a shape for larger toilet rolls. Strips with narrow curvature have a diameters of max 40 mm. Strips with wider curvature have a diameters of max 47 mm. Then I created drops of 3 sizes. Drops can be glued to the cap.