Co2 12g Stackable Containers Case

thingiverse

This is a remix from CO2 cartridge container LARGE by rc_jetman --- there is room for 25 12g cartridges and you can stack them as tall as you want. It also has a magnetic lock for the lit to stay closed. You need 2ps. 10x10x1mm magnets if you want to use this feature. There is also a .SVG included for plotters/laser-cutters etc. if you wish to use decals on the lit, I've used some vinyl wrap woodland scheme on mine. It's also really easy to cut it out with a hobby knife as there are only straight lines. - As for the printing goes here are some tips to get a nice and fast print as some can be printed at 0.3 resolution and some at 0.2 or 0.1 - The two main (big) parts CO2 Full Part 1_fixed A1 & CO2 Full Part 1_fixed A2 v2 Can both be printed at 0.3 only part CO2 Full Part 1_fixed A1 needs support - The lit CO2 Full Part 2_fixed A1 Can be printed at 0.2 - The tiny magnet older CO2 Full Part 2_fixed A2 Needs 0.1 --- You can use CA glue on all parts if you print it with PLA also the magnets stick well with CA glue. There is only one concern there is a front and back of the 2 big parts you need to glue together. Check the pictures i included also a picture that tells it all. But basically the front of the top part hold the magnet the front of the bottom part has a bigger hole in the bottom then the other sides. These 2 parts need to line up. https://www.youtube.com/watch?v=n4dPVL6YzdA&feature=youtu.be