Coleman Jumbo Gas Lantern

thingiverse

This is a printable model of a Coleman Jumbo Gas Lantern from the 1920's. This is not a 100% accurate model, I chose to omit many fine details in exchange for easier printing. The model was originally designed in inches, using rough measurements to the nearest 1/16th of an inch. It was not scaled down or converted to metric when exported. As a result, you will need to scale the model as slicers are metric based. Keep in mind, if you intend to print this in inches at full size (scaled 2540%) it will be very large, at over 8.5 inches in diameter and 20 inches tall. I do not intend to print it at that size, which is another reason I left out many fine details. Because this is a stationary, non functioning model I chose to print with 10% infill to save on filament. I did use supports as there are several 90 degree overhangs, plus the pump which extends up and out from the fount.. While I personally choose to print everything with a raft, I am almost certain this could printed straight to the bed with no issues. I am currently working on an updated version with changes to the design of the valve to make it more true to life while also maintaining an easy way to remove supports with damaging anything. This may lead to making the valve a separate piece, in which case I might to the same with the pump.