Colorful Upgrade For Ultimate Prusa

prusaprinters

<p><a href="https://www.printables.com/model/50022-ultimate-prusa-casing"><strong>An Upgrade for the Ultimate Prusa Casing</strong></a></p><p>For those who want a little more color on the UltimatePrusa casing.<br>These sleeves are simply pushed into the honeycomb pattern.<br>I know it is like a puzzle because there are many different lengths but once this is solved it will look very nice.</p><p><strong>Important:</strong><br>Due to the small tolerances, some sleeves will fit more loosely than others. In this case, simply stick a piece of tape on it and push it in. If it is tight, there will be no noise.<br>For whatever reason, prusaslicer sometimes not all walls completely sliced depending on the profile. If this is the case, set the external perimeters to 0.44mm.<br><br><strong>Edit:</strong> I've added a separate stl file from the top row in case you just want this one.</p><p><strong>There is also a </strong><a href="https://www.printables.com/model/155017-v6-nozzle-holder-for-the-ultimate-prusa-casing"><strong>model that turns the top row into a storage space for your nozzles!</strong></a></p><p>For those who want to print a little less there is also a version with shorter pieces. However, these usually have to be fixed and it is more difficult to align them evenly.</p><p><strong>If you like check out </strong><a href="https://www.prusaprinters.org/social/38556-extrutim/prints?o=liked"><strong>my other designs</strong></a><strong> too!</strong></p>