Compact iPhone 11 Pro Stand

prusaprinters

<p>Designed for the iPhone 11 Pro, but can be tweaked for any phone due to parametric design.</p><p>The stand is 17mm high and has built-in configurations for 60-80° in 5° increments. The following design parameters can be modified via the equations editor:</p><ul><li>Phone width/length/thickness</li><li>Phone front/rear/corner fillet size</li><li>Stand depth/height/width/tilt angle/side wall thickness (depth is determined by phone length + offset to account for center of gravity)</li></ul><p>Provided STLs target an iPhone 11 Pro with dimensions of 144 x 71.4 x 8.1 mm. The provided files will also likely work for the Pixel 5 (144.7 x 70.4 x 8.0 mm) but the Pixel 4 may be a tight fit (68.8 x 147.1 x 8.2 mm).</p><p>Customize this design by plugging in your phone's official dimensions to get a very snug fit. I would recommend adding an additional 0.2-0.4mm to the phone width parameter so that it's not too tight.</p><p>Stand height of 15mm is about the shortest the stand can be without compromising stability. 17mm seems to be optimal, but you can modify the design and increase the stand height to 20mm or so if you want the phone to be even more securely attached. The edge shape of the phone also contributes to how high the stand needs to be. A rounder edge (iPhone 11) will need more height to keep the phone from slipping out compared to a square edge (iPhone 12).</p>