Complete Truss & Accessory Pack

prusaprinters

<p>0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill</p><p>M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial</p><p>All files have been test print on a CR10s printed in PETG.</p><p>If there's a piece missing shoot me a msg so I can make it!</p><p>Files:<br>-truss_accessories.3mf (all parts placed properly with infill modifiers)<br>-truss_100.stl (truss stick 100mm long, no support)<br>-truss_100_support.stl (truss stick 100mm long, custom support)<br>-truss_200.stl (truss stick 200mm long, custom support)<br><strong>-[NEW]truss_200_LP.stl (low profile custom supports)</strong><br>-truss_200_nosupport.stl (truss stick 200mm long, no support)<br>-truss_350.stl (truss stick 350mm long, custom support)<br>-4way_vers_corner.stl (4 way corner, print 100% infill)<br>-offset_corner.stl (3 way corner offset for bolts)<br>-2way_vert_corner_v2.stl (2 way corner for vertical use)<br>-truss_plate.stl (truss plate to accommodate wingnuts)<br>-truss_plate_thin.stl (self explanatory)<br>-half_cube.stl (25mm truss stick, 100% infill)<br>-parrot_stand.stl (truss topping mount to avoid ratchet straps)<br>-grapple.stl (attach truss in stranger ways!)<br>-screw<i>jack</i>{a,b,c}.stl (adjustable height adjustment)</p><h3>Print instructions</h3><p>0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill</p><p>reference .3mf file using prusa slicer for detailed orientation and infill modifiers</p><h3>Current Work:</h3><p>-Curved truss, looks like it needs polar slicing so far</p><p>-angled piece, hinge</p><p>-fishline chain motors</p><h3>Changelog:</h3><p>-(truss_200_LP.stl) added low profile supports to achieve less waste/save prep time<br>-(truss_accessories.3mf) updated to include infill on bottom 1mm for truss_200 and truss_350 to accommodate prusa slicing error resulting in weak bed facing horizontal stretchers</p>