Completely printed bottle opener

prusaprinters

<p>This opener uses a curved prying edge that catches on a substantial amount of the sharp cap edge, the extra contact spreads out the opening force, so the opener is much less likely to be damaged by the cap edge.</p><p>The cap lever covers the whole top of the cap to keep bending to a minimum, and the lever lip forces the cap into the opener so you only have to lift vertically to the bottle.</p><p>-No metal: does not need a coin or other metal parts</p><p>-Opens bottles easily and quickly</p><p>-Durable, can open lots of bottles</p><p>-Ergonomic, fits in the hand well</p><p>-Does not bend the cap</p><p>-Small enough to fit in pocket</p><p>-Easy to print</p><p>If you want to stick it on a fridge or retain the cap, print the version with the hole and add a 6x3mm magnet.&nbsp;</p><p>Printing instructions:</p><p>Print with 4 perimeters or 1.6 to 2 mm shell thickness and 20-25% infill.&nbsp;</p><p>Having a thick shell is the most important part, as it makes the bottle opener durable.&nbsp;</p><p>I tried PETG and PLA and both work fine.&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>