Cone Diamond Donut Intake Bubbler 3D print model

cgtrader

Good Day, a design to test your overhangs, the Diamond Cone Intake Bubbler will push your printer to it's limits. This design was intended for people looking for a medium to large size waterpipe/ sculpture, please be aware that certain modifications are required to make this a fully functional water pipe; take note of your print settings before printing because they must be modified to print slow or stringing will occur on the overhangs and this may cause the long print process to fail.Printing must be done with filament (PETG or PLA) that is either FDA approved or certified food safe/medical use, this ensures the ending result is non toxic through inhaled vapors/smoke. First modification required is a 18mm GLASS male attachment to fit your prefered bowl/ nail, please make sure the glass has a 18mm male insert, if not certain take a look at the provided txt.jpg documents for more information. The second modification is required to the print settings, print slow for best results, the third and last modification required is support structures, minimal support is required to successfully print this model (support tuching build plate platform). The dimensions of this design are 140mm X 140mm X 235mm NEVER LIGHT PLASTIC ON FIRE, THE POISONUS FUMES ARE DEADLY, use a glass bowl or attachment. I do not condone under age smoking.​ Infill: 100% Plastic: PLA/ PETG Infill Support: Rectilinear Support: Yes (Touching buildplate) Resolution: 200-300 microns (.2mm-.3mm) Before going Forward please be aware that your printer must be calibrated to avoid leaks/ unwanted bubbles/ stringing/ under extrusion/ and last but not least lifting due to high speeds on overhangs NEVER LIGHT PLASTIC ON FIRE, THE POISONUS FUMES ARE DEADLY, use a glass bowl or attachment. I do not condone under age smoking.​