COSCO Folding Step Ladder Leg Tips
thingiverse
Replacement feet ( "Leg Tips" ) for the COSCO Model 11-112 DGR Two-Step Folding Step Ladder (circa 2011). Might also fit 3-step and/or newer models. Rear feet fit 19 mm (3/4 in) tubing, with a 16.5° angle. Front feet fit 19 mm x 24.5 mm oval tubing. with a 21.5° angle and 3° tilt. Front feet are specific, left and right. Rear feet are interchangable. < > Designed with .1 mm allowance for tight slip fit - tap on with hammer. Rear leg tips should be rotated ('toed out') approximately 15° Front leg tips come in left and right, as you face the step ladder. The tilt angle becomes clear as you look at it with the ladder. Double check it looks right before installing. < > Aluminum pop rivets that held original feet can be cut off with hacksaw and discarded.
With this file you will be able to print COSCO Folding Step Ladder Leg Tips with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on COSCO Folding Step Ladder Leg Tips.