COVID-19 PPE Face Shield For Continuous Use

thingiverse

More convenience added for continuous use, can be printed in under 50 minutes with less than 6 meters of filament. (the L version) The frames are suitable for adults and children without any modification. Light, Flexible, Tough, Comfortable - these are the key features of this design. The frame is available in two files: one with the original Prusa Screen hole path and one with the same hole path as the "Face Shield Printable in 35 minutes" frame. You can easily swap one for the other. Two types of elastic band (15/20 mm) may be required: an 18 cm button ole for the front, and a 28 cm normal or button-hole elastic band for the neckband. The neckband is attached using an adapter that can be used with any elastic band up to 20mm wide. Alternatively, it can be attached directly to a button hole elastic band without the adapter - whichever suits your needs. The front band can be replaced with a non-elastic band approximately 18 cm long, featuring two buttonholes at each end or any other design you prefer. For those who want a more fashionable look, colorful button-hole bands are available on AliExpress through this URL: https://bit.ly/3g42Ss5 (no affiliation). Settings: Nozzle: 0.4 Perimeters: 3 at 0.6mm Infill: 0 Layer height: 0.3mm Speed: 50 mm/sec Printed with: ColorFabb PLA Economy Light Grey Additionally, I've included high-resolution .stl files for the frames and a PDF of the PET screen. For those who prefer to cut their PET screens by hand, I've also provided the .stl file for the jig. Supporting the fight against COVID-19.