Cowl End Seal for Kia Optima

prusaprinters

<p>This seals the engine compartment gap under the rear of the hood near the ends of the cowl (vent area below windshield). There is one for each side. This is the RH side; mirror in slicer for LH side.</p><p>I believe this is generally called a “cowl end seal” but I'm not sure what Kia calls it. The originals are made of foam and secured with double-sided tape with the pointed ends mating with the ends of the rear hood seal. They tend to come loose over time and possibly lost.</p><p>Print using TPU. In order to keep it flexible enough, print with 10% infill, 2 top/bottom layers, and 2 wall/perimeter layers.</p>