CR-10 Octoprint Camera mount for Logitech C270/C310 with LED light

thingiverse

This is a camera mount for CR-10 3D printer. I wanted to have a camera mount to use with Octoprint. The specific design objectives are: - Can be mounted on Z-axis motor bracket so that the hotend nozzle is always visible regardless of print position - Able to adjust camera position and angle. I use a slide design to allow the camera to move and adjust distance as desired. You can also use an M3 screw to lock the position. - Supports Logitech C310 camera (This is what I have but this amount will work with C270 as well. You will need to open up the camera and manually adjust the focus for close object. Search youtube for directions on doing that. I used a wire cutter to cut off the glue on the lens. ) - Able to mount flexible LED light strip so that I can see the print better. (Without the LED light, the stock fan enclosure casts a dark shadow over the print and it's hard to see the print clearly. I may upgrade to a fang-style fan duct later but having light is always good.) I got the LED light strip from Banggood but you can get those from anywhere. https://www.banggood.com/5M-72W-DC-12V-Waterproof-IP65-5050-SMD-300-RedBlueWhiteRGB-Flexible-LED-Party-Strip-Light-p-1036080.html They are cutable every 3 LEDs. You need a 12V power supply to power them. The only piece that needs support is the clamp. All other pieces can be printed without support. Note: The LED light strips have sticky back but they keep falling off. So I ended up using zip ties to keep the LED light in place. To remove the stock mount from Logitech C310, you have to remove the round rubber gasket on both ends of the mount using a small screw driver. Once the rubber gaskets are removed, you will see a screw to unscrew in order remove the camera from the stock mount.