CR-10S E3D V6 Volcano Titan Direct Drive Extrude 火山噴嘴近端擠出

CR-10S E3D V6 Volcano Titan Direct Drive Extrude 火山噴嘴近端擠出

cults3d

Weight 55~60g重量 Turn 90 degrees on motor mount for cooling pad space not interfered by frame rails. 馬達安裝座旋轉90度,騰出空間以利安裝馬達散熱塊 Adding cooling fins (experimental) 本體上加裝散熱鰭塊希望有效 Enhanced body strength for wheel linkage structure 強化主體輪軸連結強度 Modify spacing error between the Titan outlet and inlet on the heatsink. 修正泰坦擠出口和散熱器上端的位置偏移誤差 Chamfering Down Left Corner of main fixing mount for Fan Rack mount settle. 主體散熱器固定座左下角已去角,預留空間以利安裝風扇架 It's a version 2 mount for E3D V6 Volcano Titan Direct Drive Extruder (Right Sided), designed for replacing original X axis aluminum mount. 此E3D-泰坦直式擠出座_第2版是取代原廠的X軸鋁座,只能搭配E3D Titian右擠出設計。 Might need to accomplish whole set with another left side Fan Rack design in my library. 可能需要搭配我設計庫裡的左側風扇架使用,或自行修改https://cults3d.com/en/3d-model/tool/cr-10s-left-side-fan-rack https://www.thingiverse.com/thing:2794948 Two included files are Mount Base(Ddirect_v2.STL) and Fixing Cup(DCup_v2.STL). 兩個檔案包括改裝座以及鎖固帽 Better use PLA-Glass Fibre,>PLA-Carbon>ABS>PLA+ or other High Strength/ High Temperature Durable Performance filaments. 最好使用強度較高與耐熱度較高的線材來製作,像是PLA-玻纖> PLA-碳纖,>高強度PLA+ , ABS, T-PLA, ... Recommend setting: 建議設定 Print Speed列印速度: 50mm/s↓ Infill填充: must 100% Material Flow擠出流量: 101~105% for 0.4~0.6 噴頭nozzle. Check <> and <> for better flatting. 勾選開啟<<底座>> 和<<支撐>>選項 Note: you'll need to cut a short piece of PTFE tube for connecting E3D-Titan mount and the top of Heatsink, this distance is helpful for retraction. 另外還需要減一小段鐵氟龍管來接泰坦座底部和散熱管上端,作為擠出回抽的線材緩衝空間。

Download Model from cults3d

With this file you will be able to print CR-10S E3D V6 Volcano Titan Direct Drive Extrude 火山噴嘴近端擠出 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CR-10S E3D V6 Volcano Titan Direct Drive Extrude 火山噴嘴近端擠出.