CR-10S Pro Fanduct

thingiverse

Hello Everyone, This is an alternative filament cooling fan duct for Creality CR-10S Pro. It will fit perfectly on the stock carriage of the hot end ... This fan duct should provide better air distribution around the nozzle ... You can use this fan duct in case you have BLtouch sensor ... I didn't try it with the stock capacitive proximity sensor. Best print settings: Layer height = 0.2 mm Top Solid Layers = 4 Bottom Solid Layers = 4 Outline/Perimeter Shells = 2 Outline Direction = Inside-Out First Layer Height = 100% First Layer Width = 100% First Layer speed = 45 % Retract distance = 6.5 mm Retract vertical Lift (z hop) = 1 mm Retract speed = 140 mm/s Force retraction between layers = OFF (unchecked) Print speed = 50 mm/s Infill = 100% Support = Yes (see the photos) Raft = No need You need to rotate this model -90 on Y axis. You need to use longer screw to mount this fan duct.