CR-10S Pro USB to mini-USB adapter mount

thingiverse

This is a mount for a USB to mini-USB adapter which uses the mounting points of the stock mainboard. The mini-USB port is in the same spot as the original one. I used an Adafruit adapter from which I carefully removed the casing with a precision cutter. I also had to wrap the adapter with a few turns of electrical tape because the hole in the mount in a little large. The 3 middle mounting holes on the bottom part are designed for M3 threaded inserts. The holes are 4mm wide and 6.7mm deep. Here's a list of the parts I used for this: * [Adafruit mini-USB to USB adapter](https://www.adafruit.com/product/4211), with the casing removed * Ruthex M3x5.7 threaded insert (x3) * M3x8 button-head screw (x3) - *Joins both parts* * M3x6 button-head screw (x2) - *Stock mounting points* * M3+M4 washer (x2) - *Stock mounting points*