CR-6 SE (MAX) / CR10 Smart - belt tensioner Z-axis synchronizer
thingiverse
**Hardware needed per tensioner** 1 x Ball Bearings 608 (8 mm x 22 mm x 7 mm) 1 x M3 x 10 1 x M3 T-nut (alternativ : [3d printed part](https://www.thingiverse.com/thing:3050607) ) 1 x M4 x 16 1 x M4 nut **Installation** Slide the tensioner from the center of the extrusion profil to the right (or left) to adjust the tension. You can choose to place 1 or 2 tensioners depending on how much the belt needs to be tensioned. *WARNING - if you don't use the stock extruder A tensioner placed on the far left side could interfere with the extruder footprint. I recommend to adjust your slicer profil and/or your firmware to reduce the build volume on the Z-axis accordingly.*
With this file you will be able to print CR-6 SE (MAX) / CR10 Smart - belt tensioner Z-axis synchronizer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on CR-6 SE (MAX) / CR10 Smart - belt tensioner Z-axis synchronizer.