Cr10s Direct Drive with Bondtech, E3D(Volcano), EzABL probe, Threaded Inserts and Prusa fan mount

thingiverse

a remix of @greg191134's design. Thought it looked like a clean design and easy assembly. Gregs design is definitely the cleanest one available, it is super rigid and perfect if you want to assemble it once and leave it there. Our printers get used on a daily basis and sometimes things go wrong and we need an easy reliable way to disassemble and reassemble without fear of having plastic threads stripping or having to cut wires and solder because of embedded cable routing. In summary: I've remixed gregs design to utilise brass threaded inserts (M3) Ive also changed the fan cable routing on the front so it is free and not embedded, added more clearance for the heat sink fan, added a EzABL probe mount, added space for an e3d collet clip on top of the heatsink so the ptfe tube is locked in place, added heat sink exhaust channels to encourage smoother exhaust flow of hot air. I've also added a TH3D EzABL probe mount. ***The photos of installation and final assembled printer are from version 1 and so don't reflect the changes made in version 2 NOTE* V2 - 23/04/19 Created a larger heat sink fan cavity as the previous one was too tight causing the fan to bind when tensioning the front housing to the back. Added brass heat set insert for the fan mount, Added increased boss thickness around inserts that needed extra walls. Switched Probe mount to a vertical V grove vs Horizontal and decreased overall size. Added Heatsink Exhaust channels to encourage smooth air flow exiting rather than buffeting around the probe mount. Added space for a e3d collet clip above the heatsink so the bowden tube can be properly locked in replace and remove any slop. Probe offset is: X+48 Y-2 Update: 16/07/19 Added ezABL pro mount, as the adjustment screw is on the side needed to create a cut out that allows access.