Cr10s Pro Satsana

thingiverse

Here is a developed Satsana for the Cr10sPro V1 complete with indictive sensor holder hole. After alot of searching and not finding one, I decided to enlist a friends help to design one. There are 2 versions here. 1 for an all metal hotend for eg MicroSwiss or as I'm using, BTT all metal hotend. There's also a version for the original round cooling finned hotend also. Then there is also the step files included if you want to alter or redesign. I've printed in Pla and been fine. All screw holes are M3 and theres also a slotted holes design to alot for any movement needed for lining up to the hot end. It is able to house both 4010 and 4020 hotend fans and the original 4020 radial part cooling fan. For the sensor location, for the all metal hotend, I've used pronterface with a M851 X-22.00 Y-20.00 then a M500 command to save settings. For the original hotend, I would suggest M851 X-22.00 Y-21.50. Then the same M500 command to save. On the back plate, I've used a small 12mm long M3 and nut so the it is mounted with 3 contact points to be secure. Also in the design, a Bowden tube holder/support, to which I've used for the wiring also.