CR6 SE to Triangle lab Hotend adapter with fan shroud duct

thingiverse

I wanted to run an all metal hotend in my CR6 to print at higher temps, found the triangle labs dragon hotend and it had good reviews at a reasonable price. Couldn't at the time find an adapter to use the factory strain gauge for auto bed leveling, I thought i could design an adapt that would work, so i ordered it. This is the result. Currently using it and everything is working great. I needed to install a fan. Found this https://www.thingiverse.com/thing:4601940 (thanks eponra) fan holder/duct for the Dragon hotend with 4010 fan, but didn't like how it mounted and that it didn't fit under factor cover. So i remixed it to have a better mounting that worked with the adapter and fit under the factory hot end cover. There is 3 different versions of the hot end adapter, One to work with the modified fan duct to have the same nozzle height as factory. Another to work with the modified fan duct to have the same heat block height as factory. and the other one to match factory Nozzle height using the original fan duct if you don't want to use the factory hot end cover. All adapters work with the factory screws, PTFE coupler and the screws that come with the hotend. The fan duct has m3 threads designed in them for mounting, but found that it also works with the screws that came with the 4010 fan if you don't have m3 bolts. Original printed in PETG and used for a number of weeks with no problems, but did the upgrade to print with Nylons etc, so once I had it running, I reprinted them both in Carbon Fiber Nylon.