Crash leveler for Dual Z-screw 3D Printers (Ender 3, Mega Zero etc)

prusaprinters

<p><strong>UPDATE:</strong> I've added the "Compact Crash Leveler" remix by <a href="/foureight84/designs">@foureight84</a></p> <p>This is designed to fit all 3D Printers with Dual Z-screws that use 40x20mm Extruded frames. eg Anycubic Mega Zero, Creality Ender 3 etc</p> <p>This will allow you to level your printer using the same method as Prusa printers, just drive the X gantry up to the top of the frame, and gently "crash" into the levelers to level your X gantry.</p> <p>It's designed to be installed using 2x M4 Cap-head bolts and 2x M4 T-nuts per side.</p> <p>I recommend printing these with 6 layer top / bottom and walls with 25% Cubic infill for maximum strength.</p> <p>I've written a simple Gcode script to level your X-gantry on an<strong>Anycubic Mega Zero v1.0</strong> - due to having a heated bed, I hit the crash revelers at ~215 mm Z height so have set my leveling command to 220mm max Z height. You might need a taller Z height depending on your printer config.</p> <p>To use it, just put it on your SD card and "print it" - it'll tell you what it's doing on the screen via M117 commands.</p> <p><strong>This script assumes you have ABL</strong>, if you don't then this script could make a real mess so please be careful.</p> <p>You shouldn't need to run this very often, eg once a week tops, or before big long prints to make sure everything is spot on.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>Anycubic Mega Zero</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div><strong>Infill:</strong></p> <p>25% Cubic</p> <p><strong>Filament:</strong> X3D Pro PLA White</p> </p></p> Category: 3D Printer Accessories