Creality BEST DIRECT DRIVE MOUNT

thingiverse

Probably the best Directdrive setup for Creality printers. It has an absolutely compact design, perfect weight distribution and is very sturdy. 100% tested and working! The special thing about the setup is, on the one hand, the high-quality components, which can easily be exchanged for others, and the modular expandability of the setup. The weight is distributed over two attachments: The extruder and stepper are held by the rear attachment, which is screwed onto the carrier plate from behind so that the weight of the stepper and the extruder is directly above the rail. The hotend and the remaining attachments are attached from the front using the Klemco mount. This ensures perfect weight distribution and no front-heavy setup. The setup is designed for a BMG extruder and a Dragon hotend, but all other hotends can also be attached with a grove mount. The setup is based on the modular, well thought out and innovative Klemco Mount. https://www.klemco.net/e3d-compatible-multi-mount-creality/ It can be purchased on Amazon and various other sales platforms. Just search for "Klemco Mount" or "creality V6 Mount". You can also print the mount and dont need to buy it, but i recommand to buy it. The STEP file you can get from Klemco homepage. By Printing the Klemco Mount you do not need to buy anything. The BL Touch attachment and the blower attachment are remixes of the original Klemco designs. The BL Touch Slider was shortened to the correct length and the holder for the blower was made 7mm narrower. What you need: - Klemco Mount - M3 Screws (come with Klemco Mount) - BMG Extruder - Dragon (HF) Hotend (or other Hotend with grove mount eg. E3D V6) - Short piece of PTFE tube - NEMA 17 pancake stepper (original stepper can also be used) Have fun with an absolutely stable and reliable direct drive setup.