Creality CR10S Pro Filament Runout Sensor Mount for 2020 Extrusion

cults3d

I modded my CR10S Pro with a Hemera direct drive extruder with a Volcano hotend. This meant that the filament sensor was not in a good place anymore. To make the sensor continue to be useful, I moved it to the top extrusion. I built this in Fusion360, and include the fusion file and a STEP, as well as the stl's. There are 2 parts: Part 1: the Sensor Clamp, which, um clamps onto the sensor, using two of the original countersunk screws that mounted it to the original position. Part 2: The 2020 extrusion mount, which is a tight fit with M4 bolts and drop in nuts. They connect to each other with a pivot, centered on the top of the filament path, and they both print with no supports. I intend it to be mounted to the top of the 2020 going across the Z-gantry, to be in a straight line between the filament spool and the extruder going left-right on the X-gantry. If your filament spool is mounted to the side, you could mount this to any 2020 extrusion.