Creality Ender 3 S1 Vibration Dampeners with Spring - .f3d file included

thingiverse

Made from scratch but used this for some dimensions - https://www.thingiverse.com/thing:3316671 Just some more vibration dampeners/noise reducers, but with a spring! I replaced the stock springs with silicone spacers so I had them laying around. I doubt the spring is really doing much, looks pretty cool though! I only know that they fit an Ender 3 S1 Pro(I would imagine all the S1's but I'm not positive), I'm not sure the size of the feet on other printers as well. The space for the feet are 21x40 so if your stock feet pad things are smaller than that it should fit. Foot_Inner has the grooves for the spring to sit in. Slide em' in Foot_Outer and you're good to go. You’ll need to print 4 of Foot_Inner and 4 of Foot_Outer. The factory springs are pretty tall, 25mm so these feet are taller than most of the ones I've seen. You can get shorter springs and remix it if that kinda thing tickles your fancy. There's also grooves on the bottom that fit 1/2" round bumpers so they don't slide. Will print best with .2mm layer height and a .4mm nozzle. I included the .f3d file to make it easier to remix if you use fusion. It's a little bit sloppy but you'll get it done. Springs I used(that also come factory in the printer) - https://a.co/d/eUDMKiB Scotch SP951-NA Cabinet Bumpers - https://a.co/d/dUoUI9s I found these bumpers and like them better - https://www.lowes.com/pd/Scotch/5013549207 If you print these please post pictures!