Cryptex

prusaprinters

<p>A cryptex with a five-digit customizable code, just like in the movie. To assemble the model/ set your code you must:</p><ol><li>take one “spacer (print 5 times)” and slide it all the way down the “outside cylinder”</li><li>align the small slot on the inside of the first "Keyring (print 5 times)" with the slit in the “outside cylinder”</li><li>slide one “codering (print 5 times)” over the first keyring, so that the first letter of your desired password (e.g. the “A” from “Apple”) lines up with the arrow on the side of the outside cylinder.</li><li>slide another “spacer (print 5 times)” over the code-and keyring pieces.</li><li>repeat this process 5 times, so that you now have a custom 5 digit code. For the very last spacer at the open end of the “ outside cylinder”, use the “big end spacer”.</li><li>glue the “big end spacer” to the “Outside cylinder”, but be careful not to glue the spacer to any of the rotating coderings, otherwise the cryptex will not work.</li><li>with all the little slots in the keyrings lined up with the slit in the “Outside cylinder”, push the “inside cylinder” into the “outside &nbsp;cylinder”. It should be able to freely move back and forth, so that you can open and close your cryptex.</li><li>scramble the code and make sure you cant open the cryptex anymore.</li><li>optional: print out the availible display stand and display your new safe on it.</li></ol>