Cube support for lithophanes 10x10 (Cube support for lithophanes)

cults3d

Cube-shaped support for 4 lithophanes 10x10cm and maximum 3mm thick. There are 2 models of the main support available. One with hole to pass cable in case an interior light is installed that requires it. And the other without cable hole in the case of installing an interior light that does not require it (light with batteries or battery). There are 3 pieces to download: 1- Base bracket (there are 2 models as I said before, with hole for cable and without hole.). Choose the one that suits you best. 2- Top adjustment of the base bracket. 3- Top end cap. How to assemble? 1- Attach the 4 lithophanes to the main support. 2- Place the upper fitting on top of the hub, so that it fits the 4 lithophanes. 3- Finally put a light inside and place the end cap (this can be easily removed and put on). IMPORTANT!!! *The cube is square, measuring 11.2x11.2x11.2cm. *The lithophanes to fit have to be 10x10cm and 3mm maximum thickness. *All pieces are designed to fit perfectly having a small margin of 0.2mm. In my prints I never had a problem fitting as it all fits perfectly. *It is possible that due to the printer model or configuration, you may have to file or remove small filaments or imperfections that are sometimes created during printing. This does not affect the final result at all, as once removed everything will fit perfectly. *Keep in mind the fragility of the cube, if something doesn't fit don't force it! File a little and try again.