CubePro X-Carriage Replacement

thingiverse

We have a few CubePro Printers at the maker space I work for. This is a drop in X-carriage replacement that will allow the mounting of a Titan Extruder clone with a V6 style hotend. This will hopefully serve as a easy swap out part we can use as the proprietary printjets on the cubes start failing. NOTE: This part is in the testing a tweaking phase. It is being printed currently in PLA (final version will be done in ABS) tested and then the model is being tweaked. This revision does fit the cubePro but has not yet been tested with the extruder and hotend. As new revisions are made they will be uploaded to this thing page with a revision number and changes noted here. Revisions: Removed V1 due to it not working, Replaced with V1.5 V1.5.5- Stepper motor did not fit properly in the mounting bracket. Increased bracket height by 2mm to accommodate V1.5.6- Added additional support to the X-min endstop block. The old one worked fine but this may ensure longevity as force is applied over time to the top of the block V2.2.1- Extended the hotend mount and added mounting for a drag knife and mounting holes for future plotter attachment. Current Ver V2.2.1 (Split)- I was able to save 12 hours of print time and around 84 meters of filament by printing this in parts. The main plate has recesses to assist in gluing the pieces in place. also increased the M3n3 nut hole tolerances by .2mm to allow for a better fit. The drag knife cutter mount was also lowered by 5.3mm. (note that a new version will likely be done that changes the placement of theses holes, this placement works just fine however I do not like the placement of the M3n3 nuts.) Not that anyone should care with the cube pros being discounted but of course you assume any risk and or liability for any mods you preform to your printer. If you break something or void your warranty you can feel free to comment and ill try to help you but I assume no liability for what you do.