Cubicle Heaphone Holder for Haworth Compose cubicles (with STEP file)

prusaprinters

<p><strong>UPDATE 3/11/2020: There is a new version 2 of this thing, you can find it here:</strong><br/> <a href="https://www.thingiverse.com/thing:4215219">https://www.thingiverse.com/thing:4215219</a></p> <p>This is a remix of a headphone hanger which will use Qoupd's "Headphone Holder to be mounted with one screw" (<a href="https://www.thingiverse.com/thing:3840789">https://www.thingiverse.com/thing:3840789</a>) which is a remix of polxuriach's "Headphone Holder" (<a href="https://www.thingiverse.com/thing:180851">https://www.thingiverse.com/thing:180851</a>).</p> <p>The clip design was inspired by Mavericm1's Cubicle-hook. This is designed to clip over the top or side plates of a<strong>Haworth Compose</strong> cubicle with a cross section of approx 77mm x 2.6mm.</p> <p>These are designed to be printed with minimal supports, but will require some on the clip part. The two parts are designed to be glued together, and I plan to use Gorilla SuperGlue Clear Gel to do that (it has worked well with PLA in other projects).</p> <p>I have tested them and they snap on the top plate of my cubicle pretty firmly, but are easy to remove.</p> <p>Sorry no pics of this installed, but it is designed for cubicles which have a thin top and side plates that do not have overhangs on the edges (and feel a bit flimsy as well). The profile of the top plate on the cubicles these are designed to fit is approx 77mm x 2.6mm , so basically a rectangle with those dimensions.</p> <p>These models are not oriented for printing and I printed them at 0.2mm resolution. STEP files included for easy remixing. If you make one and like it please post a make, if you have a comment or suggestion to improve it post a comment and I will see what I can do to make it better.</p> Category: Office