Cubicle Monitor Hanger

thingiverse

DISCLAIMER: Please use this design with your own discretion, I am not responsible if it is not strong enough to hold any monitor. I am using it to hold a 23 inches monitor This is a monitor hanger on cubicle walls for VESA compatible monitors. The "hook" part is designed to hang on cubicle walls with thickness of 30mm. The VESA is 100mm x 100mm Hardware needed: - M10 hex nuts x 7 - M10 nylon locking nut x 2 - M10 threaded rod x 2 (length depends on use, I used 40cm for one) - M10 HEX Bolts, ~12cm For monitor_pivot <-> VESA - M3 screw 12mm x 4 - M3 screw 20mm x 4 - M3 hex nut x 4 - M3 washer x 4 (optional) For VESA <-> monitor - M4 screws x 4 (~15mm) Note: - The part of monitor_pivot and VESA is screwed and epoxy together to maximize strength. - fitting the part of slider and monitor_pivot might need sanding and lubricant to fit together and move smoothly - I have also added rubber feet on the back of part "slider", the rubber feets i used are 4mm thick