Custom Blade Disposal Box

thingiverse

A disposable blade disposal box. Print > Fill with blades > Throw away. This is an extended re-design of [zapta](https://www.thingiverse.com/zapta/)'s [Customizable X-Acto blade disposal bank](https://www.thingiverse.com/thing:2349306). * 1mm thin walls: sufficiently stable and secure, no unnecessary waste of material * 1mm slot + inner slot guard to prevent blades from falling out (should never happen) * Wedged-shaped opening for easy slot access * Round and rectangular base shape option. ## STLs * **`blade_disposal_box_40x20x60_t1 s1.stl`:** A 40x20x60 box with 1mm wall thickness and a 1mm slot, ideal for double edged razor, scalpel, and utility knife _(cutter)_ blades. * **`blade_disposal_box_40x20x60_t1 s1 so3.stl`:** Same as above but with a slot offset of 3mm. * **`blade_disposal_box_rect_40x25x60_t1 s1 so5.stl`:** A 40x25x60 rectangular box with 1mm wall thickness and 1mm slot (5mm offset). * **`blade_disposal_box_40x30x60_t2 s2.stl`:** A slightly larger box with 2mm walls and slot. * **`blade_disposal_box_60x40x40_t1 s2_so12.stl`:** A rectangular box (non-flat bottom) with 1mm walls and 2mm slot. * **`blade_disposal_box_40x20x10 BRIDGING_TEST.stl`:** A small test model. If you are unsure about your printer's bridging capabilities, print this one first to see if the bottom of the box _(top part, since printed up-side-down)_ is printed smoothly, without wasting much time and material ## Customizer If you have trouble using the Customizer always set resolution to "Draft" first, but remember to set it back to "Normal" before creating the final model.