Customizable Bike Pump Holder

cults3d

FEATURES : • This pump holder is designed to hold any cylindrical object. • I used Fusion 360 to design the object, so you have the option to change the values ​​to suit your bikes, cylinders, attachments, ... (Open the file on Fusion 360 > Go to Modify > Change parameters > Expression) PRINTING : • For the diameter of your frame or your cylinder, put the exact value on Fusion 360 to have a good tightening. • I used PETG because it's resistant to water and temperature. It's also much less brittle than PLA and therefore there is much less risk of breakage. • I highly recommend to print with support • I choose an infill of 15/20 % to keep some flexibility. • I print it on the flat face because it's easier to print and better for the mechanical resistance SETTING UP : • Just clip it to your bike frame, then put a scratch or a cable clamp to fix it. Finally clip your pump or anything else and fix it the same way. • Little tip : between the frame and the object, I put a piece of air chamber (anything adhésive will be ok) to prevent the object to slide on the frame. NOTES : • I use it every day to go to work (32 km / day) and it's perfect for me. • The STL file is for MY BIKE SingleSpeed 500 (Décathlon), frame diameter : 38,4 mm, pump diameter : 30 mm I hope you'll like my design and don't hesitate to give me a feedback if you have any questions or comments !