Customizable Ultimate Drawer System Shelf

thingiverse

# Ultimate Drawer System Intended to be the ultimate drawer system that is * printable with FDM printing * optimizable for anything you store in drawers * compatible with Thingiverse's Customizer * backwards-compatible with MarcElbichon's Ultimate Drawer System * written for ease of improvement (which could use some improvement) This Thing is the shelf customizer. For the drawer customizer, see [Customizable Ultimate Drawer System Drawer](https://www.thingiverse.com/thing:3796197). For drawer inserts/dividers see [Customizable Ultimate Drawer System Inserts](https://www.thingiverse.com/thing:3798783). For the foot, see [Ultimate Storage Drawer System Feet](https://www.thingiverse.com/thing:3815722) ## The System * Drawers and complementary shelving units are sized in units called "Us". * If only one dimension is given, it is assumed to be the height and the width and depth are assumed to be 1U. * A 1U drawer is 120 mm wide by 120 mm deep by 19 mm high. * A 2U drawer is 120 mm wide by 120 mm deep by 39 mm high. * Actual drawer width is 131 * Us wide - 10 mm * Actual drawer depth is 130 * Us deep - 10 mm * Actual drawer height is 20 * Us high - 1 mm * A 2U shelf (or cabinet) is 131 mm wide by 130 deep by 50 mm high. (You can't (currently) make a 1U shelf.) ## Contributors and Contributing This is an OpenSCAD copy then enchancement of [The Ultimate Drawer System by MarcElbichon](https://www.thingiverse.com/thing:2302575) and others to come. Contributors are welcome. You will find the complete original and up to date source code on [GitHub](https://github.com/ALittleSlow/Ultimate-Drawer-System). ## License This work is originally licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC-BY-NC-SA 4.0) but may also be distributed under the GPLv3 in accordinance with the former's one-way GPLv3 compatibility declaration. If you are interested in a commercial license, contact the [contributors](https://github.com/ALittleSlow/Ultimate-Drawer-System/graphs/contributors). ## Features Compared to MarcElbichon's version * Produces faithful replicas * Add an ergonomic drawer pull * Adds a drawer locking mechanism * Adds a stops to help keep drawers from pulling all the way out (needs testing) * Adds 1.5U and 2U widths and depths to the standard 1U width and 1U depth. * Adds option to clip shelving units together instead of (or in addition to) screwing them together. * Adds optional front and rear snaps to hold drawers in and keep them from falling out * Adds an optional foot that presses into the bottom holes * Added 0.5U wide, and 0.5U deep, primarily for test * Made screw holes optional * Made top and bottom ribs optional (not needed if you are doing infill) ##Version 1.1 * Fixed error where hex and countersink holes were on the wrong sides (thanks, malikai!) * Optional front and rear snaps to hold drawers in and keep them from falling out * Added a foot that presses into the bottom holes * Fixed bug in bottom hole placement * Fixed rib in top interefers with top front clips at 1.5U W and 0.5U wide * Added 0.5U wide, and 0.5U deep, primarily for test * Made screw holes optional * Optional top and bottom ribs (not needed if you are doing infill) ##Version 1.01 Fixes a couple bugs in clip pocket generation. ## Roadmap Planned enhancements include (in no particular order) * Drawers with dividers * Handles for portable storage units * Custom inserts for specialty storage * Bumpers for increased ruggedness * Sturdier versions of the drawers for increased ruggedness * Custom label inserts ## More information You may find additional information, discussion, and resources at * https://github.com/ALittleSlow/Ultimate-Drawer-System * [Customizable Ultimate Drawer System Drawer](https://www.thingiverse.com/thing:3796197). * [The Ultimate Drawer System by MarcElbichon](https://www.thingiverse.com/thing:2302575)